Clearomizer Maat Tank - Voopoo

6,5ml DTL Up to 26mm

Voopoo is back with its clearomizer Maat! The program? An aerial draw DL for incredible clouds of flavourful steam.

With the Maat clearomizer, fill up to 6.5 ml (pyrex bulb) of eliquid from the top (top-filling). The bi-directional flow in the form of a volcano crater reduces the loss of airflow by 60% compared to other clearomizers and makes the tank tight. Change the airflow with the adjustable airflow with an enlarged air inlet.

This tank is compatible with TPP coils, designed in single mesh with dual heating zones for fast heating. The mesh technology of the coils promotes the production of steam but also the excellent restitution of flavours of e-liquids. All with a longer life.

Thanks to its pin 510, the tank is compatible with boxes of at least 26 mm wide.

6,5ml DTL Up to 26mm Top Filling

Product Description

The Maat clearomizer from Voopoo, a real steam machine!

Voopoo's Maat clearomizer is designed with a volcano crater inside to produce incredible vapor clouds in DL air draw. This reduces the airflow loss by 60% compared to other clearomizers and makes the tank airtight.

The Maat Tank clearomizer from Voopoo, for incredible clouds of vapor

The Maat subohm tank of 26 mm in diameter is made of stainless steel. This one is powerful and offers an aerial draw DL for big clouds of tasty steam. The bi-directional volcano crater flow reduces airflow loss by 60% compared to other clearomizers and makes the tank airtight. Adjust the airflow with the adjustable airflow with enlarged air inlet. This way, get a more or less airy draw to vary the vape experience.

The pyrex tank of 5 ml (straight pyrex) or 6.5 ml (pyrex bulb) is filled from the top (top-filling) simply by unscrewing the top-cap.

The Maat tank is compatible with Voopoo TPP coils

The Maat clearo is compatible with TPP Voopoo coils 2 of which are delivered to you:

- TPP-DM2 of 0.2 ohm: very aerial vape tasty a little tighter than the version of 0.15 ohm - To use between 40 and 60W - Ratio 50PG/50VG to 20PG/80VG

- TPP-DM3 of 0.15 ohm: very airy flavourful vape with large vapor cloud - to be used between 80 and 100W - Ratio 50PG/50VG to 20PG/80VG

Designed in single mesh with a double heating zone, these coils heat up quickly to give way to large vapor clouds. The mesh technology of the coils promotes the production of steam but also the excellent restitution of flavours of e-liquids. All with a longer lifespan.

However, the clearomizer is also compatible with the following TPP coil (sold separately):

- TPP-DM1 of 0.15 ohm: very aerial flavourful vape with large cloud of steam - To use between 60 and 80W - Ratio 50PG/50VG to 20PG/80VG

- TPP-DM4 of 0.3 ohm: aerial vape with less vapor - to use between 32 and 40W - Ratio 50PG/50VG to 20PG/80VG

To change the coil, remove the magnetic cartridge and turn it over. Then, pull the damaged coil, prime the new coil and insert it into the slot. Wait 10 minutes before vaping.

Attention, it is necessary to change your coil about every 2 weeks depending on your use. Remember to replace your coil when you change flavour or you feel a burnt taste.

With which box to use the clearo Maat Voopoo?

Thanks to its pin 510, the Maat is compatible with the boxes of at least 26 mm wide, including the mod Argus GT 2 of Voopoo which has the particularity of being indestructible.