Clearomizer Melo 4 D22 - Eleaf

Clearomiseur Melo 4 D22: The best of Melo in a small model

The novices in search of simple vape as hello see their wishes granted by the manufacturer Eleaf with its range Melo. The little guy of the Melo clan may be a half size, it has nothing to envy to its doyens. On the contrary, its small diameter of 22 mm can be coupled with a small box to make a compact e-cigarette and simple to carry everywhere.

The Melo 4 D22 has a simple and effective design like its practicality. Its pyrex tank of 2 ml is filled very easily by sliding the top cap with a simple push. Its delrin drip tip 510 does not overheat, so your lips are safe from burns. Under the tank, you will find an airflow ring(bottom airflow) to adjust your vape to the millimeter and take full advantage of the versatility of this clearo compatible with the excellent Eleaf EC coils.

Eleaf EC resistors, the heart of the Melo 4 D22

The Melo 4 D22 owes its brilliant MTL and DL draw performance to Eleaf EC resistors. This includes the eC coils, the eC2 coils as well as the EC-N, EC-M, EC-S and ECML.

- 0.3 ohm EC : DL draw, nice vapor production and rich flavors - use between 30 and 80 watts - ratio 50PG/50VG to 30PG/70VG - do not exceed 6 mg/ml of nicotine content.

- EC 0.5 ohm: DL draw, very important steam and beautiful restitution of flavors - to use between 30 and 100 watts - ratio 50PG/50VG to 20PG/80VG - do not exceed 6 mg/ml of nicotine content.

- EC-S Mesh SS316L 0.6 ohm: RDL draw rich in flavors - to use between 15 and 30 watts - ratio 50PG/50VG to 30PG/70VG - Prefer liquids not exceeding 9 mg/ml of nicotine.

- EC-N Mesh Kanthal A1 0.15 ohm: DL draw, large vapor production - use between 30 and 70 watts - ratio 50PG/50VG to 20PG/80VG - do not exceed 6 mg/ml of nicotine content.

- EC-M Mesh 0.15 ohm: DL draw, large vapor production - use between 30 and 75 watts - ratio 50PG/50VG to 20PG/80VG - do not exceed 6 mg/ml of nicotine rate.

- EC2 0.3 ohm: DL draw, good vapor production and rich flavors - to use between 30 and 80 watts - ratio 50PG/50VG to 30PG/70VG - do not exceed 6 mg/ml of nicotine content.

- EC2 0.5 ohm: DL draw, very important steam and beautiful restitution of flavors - to use between 30 and 100 watts - ratio 50PG/50VG to 20PG/80VG - do not exceed 6 mg/ml of nicotine content.

- ECML 0.75 ohm: MTL draw, discreet and rich flavor - to use between 8 and 25 watts - ratio 40PG/60VG to 60PG/40VG - compatible with standard e-liquid up to 9 mg/ml and nicotine salts up to 10 mg/ml.

To change your EC coil, simply remove the base of your clearomizer to unscrew the worn coil and then screw in a new one. Remember to soak your new coil by dropping a little e-liquid on its openings and letting it sit 15 minutes in a full tank before vaping.

With your Melo 4 D22 clearomizer, you will receive two EC2 coils which are the improved versions of the EC coils, one of 0.30 ohm and another of 0.5 ohm, what to enjoy from the arrival of your tank.

The Melo 4 D22 Clearomizer comes with:

- 1 clearomizer Melo 4 D22

- 1 EC2 coil 0.30 ohm (preinstalled)

- 1 EC2 coil 0.50 ohm

- 1 set of seals

- 1 user manual