After the kit Aegis Max of Geek Vape, discover the kit Aegis Max 2. An ecigarette even more powerful and lighter for large clouds of steam in air draft DL.
Enjoy a 1.1" color TFT display. The mod is even more robust, as the IP68 standard is higher. It is not afraid of water, dust or shock. Even the USB port is waterproof. In addition, it has a nice autonomy with its 18650 or 21700 battery (not included)
The chipset offers power, volt, ByPass, temperature control and VPC modes. The A-Lock system prevents accidental triggers of the ecig.
The clearo Zeus sub-ohm 2021 has a capacity of 5.5 ml with top-filling. The filling holes are larger. The tank is compatible with the Z series coils, 2 of which are delivered to you. Modulate the airflow with the leak-proof top-airflow.
Warning this product requires a battery
The Aegis Max 2 kit from Geek Vape, the version 2 of the ecig Aegis max
After the kit Aegis Max of Geek Vape, discover the kit Aegis Max 2! This ecigarette is still indestructible (tri-proof) because it is shockproof, waterproof and dustproof (IP68 standard). Perfect for the nomad vaper! This vape is composed of the box Aegis Max 2 and the clearomizer Zeus subohm 2021 with a capacity of 5.5 ml. The latter offers an aerial draw DL with large clouds of steam.
The box Aegis Max 2 Geek Vape, indestructible and powerful
You know the box Aegis Max, but here it is the version 2. It retains its strength and is resistant to water, dust and shocks (IP68 standard). This time, the mod is lighter. So you can carry your vape everywhere with you without fear of damaging it. In addition, this small box is even lighter than the Aegis Max. Its ergonomic shape melts easily in the hand. Made of zinc alloy and silicone with a leather effect coating, this ecigarette provides comfort in hand.
This mod works with a 18650 or 21700 battery (not included) for an autonomy to all tests. Know that the battery door is located below the mod. As for it, the recharge is done quickly via the supplied USB-C cable (5V/2A). However, we strongly recommend that you use a external battery charger to preserve the life of your battery. The choice of battery is important and it is preferable to use batteries with a high continuous discharge current when the box is used with a DL clearomizer and corresponding to the range used. Below 70W, use a battery with a continuous discharge current between 25A and 30A. From 70W, prefer a battery with continuous discharge current of 30A for more safety.
Thanks to its chipset, the Aegis Max 2 can go up to 100W. Several modes are available to you:
- Power: power adjustment from 5 to 100W
- Volt: power adjustment in volt from 3.2 to 4.25V
- ByPass: power according to the charge level of the battery
- Temperature control: setting of the maximum temperature not to be exceeded for the Ni, Ti and S resistive wires from 100 to 315°C
- Curve (VPC): personalized setting of the power curve
The setting is done via the buttons and the1.1" full color TFT display. To prevent accidental triggering, the screen is easily locked with the sliding A-Lock button on the side of the box.
The clearomizer Zeus subohm 2021, a larger capacity of 5.5 ml
Discover the version 2 of Zeus sub-ohm with the clearomizer Zeus sub-ohm 2021 which is even more powerful. The capacity has been increased by 0.5 ml and now reaches 5.5 ml. The filling is done from the top (top-filling). To do this, rotate the top cap a quarter turn. Know that the filling holes are larger for ease of use
Equipped with an 810 drip tip, the Zeus Sub-ohm tank is perfect for large vapor clouds(DL air draw - direct inhalation). It is compatible with the Z series coils Geek Vape 2 of which are delivered to you:
- Z series 0.2 ohm (kanthal A1 mesh and organic cotton): DL air vape - to be used between 70 and 80W - ratio 50PG/50VG or 30PG/70VG
- Z series 0.25 ohm (dual coil - kanthal A1 mesh and organic cotton): DL air vape - to be used between 45 and 57W - ratio 50PG/50VG or 30PG/70VG
The mesh technology promotes both the flavors and the production of steam.
This Geek Vape tank is also compatible with the following coils
- Z series of 0.15 ohm: very airy DL vape - to use between 80 and 90W - ratio 50PG/50VG or 30PG/70VG
- Z series of 0.4 ohm: aerial DL vape with more flavors - to use between 50 and 60W - ratio 50PG/50VG or 30PG/70VG
Replacing the coil is easy. To do this, remove the base of the clearo, then the damaged coil by pulling or with the tool provided. Prime a new coil, insert it into the slot and replace the base. Fill the tank and wait 10 minutes so that the cotton has time to soak in e-liquid.
Attention, it is necessary to change your coil about every 2 weeks depending on your use. Remember to replace your coil when you change flavor.
To vary the airflow and therefore the experiences of vape, you find an adjustable top-airflow. In addition to providing a large production of steam, it also prevents leaks.
The connection pin has been redesigned to provide better responsiveness with the mod.
The kit Aegis Max 2 Geek Vape comes with:
- 1 box Aegis Max 2
- 1 clearomizer Zeus subohm 2021
- 1 Z coil of 0.20 ohm
- 1 coil Z 0.25 ohm
- 1 pyrex replacement of 5.5 ml
- 1 adapter 18650
- 1 set of spare parts
- 1 USB-C cable
- 1 tool for the coil
- 1 user manual
The characteristics of the ecigarette Aegis Max 2 of Geek Vape :
- Dimensions: 143.80 mm x 42.06 mm x 31.50 mm
- Weight: 200 g
Si vous ne fumez pas, ne vapez pas
