Highlights of the Aspire Atlantis LX

• True MTL, RDL and DTL versatility thanks to Atlantis SE V2 coils and the two included drip tips
• A generous 3400mAh battery to comfortably make the most of its 80W output
• A reassuring SMART mode that adapts the power to the installed coil
• A practical 5 mL cartridge with adjustable top airflow to help reduce the risk of leaks
• A complete Atlantis ecosystem with compatibility with Atlantis SE V2 and first-generation Atlantis SE coils
• A pod-mod format that keeps the simplicity of a pod while offering the possibilities of a small box mod

Atlantis LX: somewhere between a practical pod and a powerful little box mod

The Atlantis LX clearly plays on both sides. It retains the simplicity of a pod with its cartridge and built-in battery, while also adopting the features of an electronic box mod with a screen, adjustable power and replaceable coils.

With dimensions of 119.5 × 40 × 30 mm, it remains relatively compact despite its generous battery and power output of up to 80W.

The result is a device that is easy to use but versatile enough to support both a relaxed MTL/RDL vape and a move towards more generous DTL vaping.

3400mAh and up to 80W: plenty to enjoy

The Atlantis LX Kit features a 3400mAh built-in battery. There is no need to buy or handle an external battery: everything is built directly into the pod.

Power can be adjusted from 5 to 80W, leaving plenty of room to use the different Atlantis SE V2 coils, from the more moderate to the more demanding versions.

Charging is handled via USB-C up to 5V / 2A. A full charge takes around an hour and a half depending on the charger used.

SMART or WATT: simple when you want it, manual when you prefer

Aspire offers just two operating modes to avoid turning the Atlantis LX into an aircraft cockpit.

• SMART: detects the installed coil and automatically suggests a suitable wattage to help prevent inappropriate settings
• WATT: lets you manually adjust the power according to your preferences and the recommended range of the coil

SMART mode is particularly useful for users who want to change coils without having to memorise every wattage range. More experienced users can simply switch to WATT mode and fine-tune their vape themselves.

A 0.96" colour TFT display

The 0.96" colour TFT display shows the main information you need while vaping: selected wattage, active mode, battery level, coil resistance and puff counter.

The controls remain simple, with a firing button and dedicated adjustment buttons. You therefore get the ergonomics of a small box mod in a much more compact pod format.

A 5 mL Atlantis cartridge designed to evolve with your vape

The kit comes with a 5 mL Atlantis MTL cartridge. Its generous capacity helps reduce the need for frequent refilling, particularly as you start increasing the power.

Filling is carried out from the side of the cartridge, while the adjustable top airflow lets you control the air intake while helping to reduce the risk of leaks.

The cartridge uses replaceable coils. You therefore do not need to replace the entire tank when the coil reaches the end of its life: simply install a new compatible Atlantis SE coil.

How to fill the Atlantis LX cartridge

The Atlantis cartridge is filled easily from the side of the tank.

• remove the cartridge from the battery by pulling it upwards
• open the silicone tab on the side of the cartridge
• fill the tank with your e-liquid up to 5 mL
• carefully close the filling port
• put the cartridge back into the battery
• Important: when filling for the first time with a new coil, wait around 10 minutes before vaping to allow the cotton to become properly saturated

Two 810 drip tips to switch from MTL to DTL

Aspire includes two 810 drip tips to make it easy to change the feel of your vape:

• MTL drip tip: narrower, designed for a tighter vape
• DTL drip tip: wider, designed for a more open direct-to-lung inhale

The 810 format also makes it easy to replace the mouthpiece if you want to customise your setup further.

Atlantis SE V2: two coils included and plenty of options for later

The Atlantis LX Kit comes with two Atlantis SE V2 coils, but the entire range remains compatible so you can evolve your vape later on.

• Atlantis SE V2 0.15 ohm: very airy DTL vape - 60 to 80W - recommended PG/VG ratios from 30/70 to 20/80 - recommended nicotine strengths up to 3 mg/mL
• Atlantis SE V2 0.2 ohm: airy DTL vape - 45 to 60W - recommended PG/VG ratios from 40/60 to 30/70 - recommended nicotine strengths up to 3 mg/mL
• Atlantis SE V2 0.3 ohm (included): open RDL to DTL vape - 30 to 40W - recommended PG/VG ratios from 50/50 to 30/70 - recommended nicotine strengths up to around 6 mg/mL
• Atlantis SE V2 0.4 ohm: RDL vape - 25 to 35W - recommended PG/VG ratios from 50/50 to 40/60 - recommended nicotine strengths up to 6 mg/mL
• Atlantis SE V2 0.6 ohm (included): open MTL vape - 18 to 23W - recommended PG/VG ratio around 50/50 - recommended nicotine strengths up to around 12 mg/mL

You can therefore start with the two included resistance values and then move towards a more open or more powerful vape simply by changing the coil.

Good to know: the Atlantis cartridge included in this kit is also compatible with first-generation Atlantis SE coils.

How to prime an Atlantis SE V2 coil

• install the coil in the cartridge
• fill the tank with your e-liquid
• close the filling port properly
• wait around 10 minutes to allow the cotton to become fully saturated
• start at the lower end of the recommended wattage range before gradually increasing the power

Proper priming helps prevent premature burnt taste and ensures better performance from the very first puffs.

When should you replace the Atlantis SE V2 coil?

A coil naturally loses efficiency over time. It is generally time to replace it when:

• flavours become less precise or less intense
• vapour production decreases
• an unwanted taste starts to appear
• a burnt taste becomes noticeable

Lifespan depends in particular on how frequently you vape, the power used and the composition of your e-liquid. Very sweet recipes tend to clog coils more quickly.

Why do we like the Atlantis LX Kit?

Because Aspire manages to offer a genuinely versatile device!

The 3400mAh battery, 80W output, SMART mode and wide range of coils allow your vape to evolve gradually. You can start in MTL/RDL with the 0.6 ohm coil, then move to lower resistances and open up the airflow as your preferences change.

Add a 5 mL tank, two drip tips and a colour screen, and the Atlantis LX becomes an excellent compromise between the simplicity of a pod and the possibilities of a traditional box mod.

Contents of the Aspire Atlantis LX Kit

• 1 Aspire Atlantis LX pod 3400mAh
• 1 Atlantis 5 mL cartridge
• 1 Atlantis SE V2 0.6 ohm coil, pre-installed
• 1 Atlantis SE V2 0.3 ohm coil
• 1 810 MTL drip tip
• 1 810 DTL drip tip
• 1 USB-C cable
• 1 user manual