Argus P1S Pod Kit - Voopoo

Argus P1S from Voopoo: A pod in pole position.

With their chipsets whirring, the various models of the Argus P1S pod are at the starting line of a Wipeout-style race that will take them to your home. Choose your champion from these little e-cigs coming straight out of a cyberpunk universe. Voopoo offers us an attractively designed pod with a beautiful aluminum alloy construction combined with a plastic that brings transparency to leave its motorization apparent.

With its dimensions of 112 × 25.7 × 13.5 mm and a featherweight of 43 g, the Argus P1S pod slips easily into your pocket and Voopoo even provides a lanyard for you to wear around your neck if you're into that.

Pod Argus P1S: Full Auto Vaping!

On this Argus P1S pod, Voopoo's chipset Gene is at the controls, so all you have to do is get your butt in the passenger seat and enjoy the ride. With 25W max on the meter, the Argus P1S adapts its power to the cartridge or coil you're using. Even activation is automatic with autodraw ignition on inhalation. A little more and Voopoo will vape for you.

Pod Argus P1S: A fast and enduring battery.

With its 800 mAh internal battery, the Argus P1S pod is a little beast of a contest. Not only will average vapers be able to get two days' vaping out of one charge (one day for the most voracious), but the battery recharges fully in just 20 minutes thanks to a 2A fast charge via USB-C.

Each time you inhale, LEDs light up to tell you the remaining battery level.

• Three blocks lit: from 100% to 60%.
• Two blocks lit: from 60% to 30%.
• One block lit: from 30% to 0%.

Argus cartridges: The assurance of a tasty vape.

The pit stop will be quick, the Argus Pod cartridges supplied with this Argus P1S pod are equipped with built-in coils, so all you have to do is replace the cartridge when it wears out. Argus cartridges feature a 2 ml tank with anti-leak coating and offer a drip tip whose shape hugs the lips beautifully. In this kit you'll receive 1.2 ohm and 0.7 ohm versions.

• Argus 0.7 ohm cartridge: MTL/RDL draw not too tight - ratio 50PG/50VG to 70PG/30VG - compatible with e-liquids from 0 to 9 mg/ml nicotine.
• Argus 1.2 ohm cartridge: Tight MTL draw - ratio 50PG/50VG to 80PG/20VG - nicotine levels from 0 to 20 mg/ml, nicotine salts and CBD e-liquids.

For those who prefer reusable cartridges, be aware that cartridges Argus without coils working with Voopoo's resistances ITO are also compatible with this Argus P1S pod.

Filling the Argus cartridge:

• Remove the cartridge from the pod.
• Open the silicone cap, fill then close.
• Put back the cartridge onto the pod.

Replacing an Argus cartridge:

• Remove the cartridge from the pod.
• Place the new cartridge in its place (magnetic system).
• Caution: If the resistor is new, prime it well by letting it soak in e-liquid for 10 minutes before vaping.

Dimensions of the Argus P1S Voopoo pod:

The Argus P1S pod kit from Voopoo contains:

• 1x Argus P1S pod
• 1x Argus 0.7 ohm cartridge
• 1x Argus 1.2 ohm cartridge
• 1x USB-C cable
• 1x neck lanyard
• 1x user manual