Lightsaber X Pod Kit - BP Mods

Pod Lightsaber X: A sexy e-cig

Manufacturer BP Mods has become accustomed to producing top-quality equipment with impeccable finishings, and continues to do so with the arrival of a new member of the Lightsaber series. The Lightsaber X is an ultra-qualitative podmod with a stainless steel body and real wood sleeve to further enhance its high-end look. With its tubular shape, the Lightsaber X podmod offers an excellent grip, and its display will give you all the information you need to make sure your vaping goes smoothly (battery level, current power and value of coil installed).

Simple and elegant, the Lightsaber X electronic cigarette will accompany you everywhere in style. A beautiful object that you can brandish proudly during your vape breaks.

Lightsaber X by BP Mods: absolute versatility

Whatever your vape style, MTL, RDL or DL draw, the Lightsaber X pod can do it all. With its maximum wattage of 60W, this pod is capable of sending out large-scale clouds as well as tight, discreet vape. Equipped with an airflow ring, you can adjust the airflow to find your vaping G-spot.

The Lightsaber X chipset remains simple and old-school, with three different modes:

- Power mode: precise, manual setting of power in watts.

- Voltage mode : Voltage setting in volts.

- Bypass mode: power automatically adapts to the coil installed and your battery level.

Pod Lightsaber X: the comeback of batteries

On previous Lightsaber models, BP Mods opted for integrated batteries, but this Lightsaber X stands out from its predecessors by giving you the option of using an 18650 or 21700 battery (batteries not supplied). This means you'll always have a spare, fully-charged battery at hand, so you won't find yourself lost in the middle of the forest without food, water or vape!

For MTL or RDL use with tight or semi-restrictive draws, an 18650 battery will do the trick (18650 adapter supplied). However, fans of big clouds who want to go a little higher in watts will be delighted to be able to use a 21700 battery for extended autonomy.

The Lightsaber X is equipped with a USB-C port that lets you quickly recharge your e-cig with a 2A charging current (cable supplied). However, we recommend that you keep USB charging to a minimum, and use an external charger for the well-being of your batteries.

The Lightsaber cartridge from BP Mods

What would your Lightsaber X be without a cartridge worthy of the name? In this kit, your pod comes with the lightsaber cartridge, with its generous 5 ml reservoir. Made from PCTG, the cartridge is embellished by a stainless steel top cap that can be removed to refill your jewel. The ultimate in perfection, you'll receive two 510 drip tips, one dedicated to MTL draw and the other for a more airy vape, a nice little extra from BP Mods.

Let's get down to business: compatible coils. The least we can say is that the Lightsaber cartridge is open to many possibilities. You can use PNP coils from Voopoo (TM/VM/TR and RBA models only), but also the GTX coils (0.2 ohm and 0.3 ohm models only). For optimum performance, you can also choose TMD coils designed by BP Mods especially for Lightsaber.

In this kit, you'll receive the following three models for an overview of all the Lightsaber X vape possibilities.

- TMD Pro 1.05 ohm: MTL draw - for use between 10 and 13 watts - ratio 70PG/30VG to 50PG/50VG. Compatible with liquids containing nicotine salts, CBD and high nicotine levels.

- TMD Mesh 0.80 ohm: MTL draw - for use between 18 and 28 watts - ratio 60PG/40VG to 50PG/50VG. Compatible with liquids with nicotine salts and high nicotine levels.

- TMD Mesh 0.30 ohm: DL draw - for use between 45 and 55 watts - ratio 50PG/50VG to 20PG/80VG. Compatible with e-liquids with low nicotine levels (up to 6 mg/ml).

How to fill your Lightsaber cartridge:

• Remove the top cap by pulling on it.
• Open the silicone tab and fill with e-liquid.
• Replace the top cap.
• Leave the coil to soak for ten minutes if it's new.

How to replace a coil on a Lightsaber cartridge :

• Remove the cartridge from the pod (magnetic system).
• Press the coil under the cartridge.
• Replace the cartridge on the pod.
• Let the coil stand for 10 minutes in a full tank if new.

Dimensions of the BP Mods Lightsaber X pod :

The BP Mods Lightsaber X pod kit contains :

- 1x Lightsaber X pod

- 1x Lightsaber cartridge

- 1x 0.3 ohm TMD coil

- 1x 0.8 ohm TMD coil

- 1x 1.05 ohm TMD coil

- 1x 18650 adapter

- 2x drip tips (DL and MTL)

- 1x spare parts kit

- 1x USB-C cable

- 1x user manual