Cartridges Vast Tri-Core – Vaporesso | x2 Pack

  • New
  • Coming soon
Cartridges Vast Tri-Core – Vaporesso | x2 Pack

Cartridges Vast Tri-Core – Vaporesso | x2 Pack

Vast Tri-Core cartridges: three coils in one cartridge, XXL tank and lightning-fast priming! ⚡🔄💨

CHF8.90
At odds
Tax included
Cartridges Vast Tri-Core – Vaporesso | x2 Pack
Cartridges Vast Tri-Core – Vaporesso | x2 Pack
CHF8.90
At odds
Tax included

Let me know when the product is available

Free delivery from 29,90CHF purchase

Vaporesso Vast Tri-Core cartridges: three coils in a single pod

The Vast Tri-Core cartridges from Vaporesso bring three coils together in a single cartridge: 0.8, 0.6 and 0.4 ohm. There is no need to swap cartridges to change your vaping style: simply choose the mode on your Vast pod kit (ECO, NOR or PWR) to go from a discreet MTL vape to a more generous RDL one.

Each cartridge comes with a 10 mL tank featuring SSS 3.0 leak-resistance technology. The progress doesn't stop there, as Vast Tri-Core cartridges also offer 1-second priming thanks to an innovative system from Vaporesso.

Cartridges sold in packs of 2.

Key features of the Vast Tri-Core cartridges

  • Tri-Core Mesh technology: three coils (0.8, 0.6 and 0.4 ohm) built into a single pod.
  • One mode for each coil: ECO, NOR or PWR, selected from the Vaporesso Vast kit.
  • A 10 mL tank for long vaping sessions between refills.
  • Insta Start: coil priming in 1 second for the impatient.
  • SSS 3.0: enhanced protection against leaks.
  • Extended lifespan: up to 6 refills per pod.

Tri-Core Mesh: three coils, one pod

Vast Tri-Core Mesh

Normally, changing coil means changing cartridge. With Tri-Core Mesh technology, Vaporesso came up with something smarter: the pod houses three coils, and the mode selected on your Vast kit decides which one does the work:

  • ECO (0.8 ohm): a discreet vape with a slightly tight draw, close to a puff. Ideal with nicotine salt e-liquids or high nicotine strengths.
  • NOR (0.6 ohm): a vape balanced between vapour and flavour. Well suited to e-liquids with a 50/50 PG/VG ratio and a nicotine strength of up to 12 mg/mL.
  • PWR (0.4 ohm): maximum vapour and more intense flavours. Perfect if you like e-liquids richer in VG (70% maximum), with a nicotine strength of up to 6 mg/mL.

Switching modes takes a single click. One pod, three vapes: no more juggling lots of different cartridges.

Insta Start: fill, push, vape

Vast Insta Start

With Insta Start, Vaporesso promises priming in 1 second: no need to leave the coil to soak for long minutes before your first puff. A welcome feature on a 10 mL open system.

There is one small condition: you need to follow the process below, and above all push the pod together immediately after filling. That is the step that makes the difference compared with a standard cartridge.

How do you use Insta Start? The 3-step process

  1. Fill: open the tank and fill it with e-liquid up to the minimum line for the first fill.
  2. Remove: take off the silicone piece.
  3. Push together: immediately assemble the two parts of the pod by pushing them against each other.

All that's left is to insert the pod into your kit and start vaping.

Important: don't skip step 3 and don't put it off. Without this assembly right after filling, the e-liquid may spit back out instead of feeding the coil.

SSS 3.0: a pod that stays nice and dry

SSS 3.0

SSS 3.0 technology enhances leak resistance thanks to a buffer cotton design and internal liquid circulation. Vaporesso states that its pods stay leak-free after 72 hours of scorching heat in a car (not to be tried with your mother-in-law) and 15 hours of cabin pressure variations on a plane. A handy extra, because nobody likes sticky fingers smelling of watermelon or dragon fruit.

10 mL and up to 6 refills per cartridge

With its 10 mL, each refill keeps you going for a good while. Vaporesso states up to 6 refills per cartridge. The coil is protected by a nano-scale CoreGuard coating, designed to extend its lifespan.

Good to know: these figures are test results announced by the manufacturer. Actual lifespan depends on how often you vape, the mode used and the composition of your e-liquid.

How do you fill your Vast Tri-Core pod?

Once the first fill and its business of removing the silicone and pushing the parts together are out of the way, refilling the Vast cartridge is a breeze.

  • Open the silicone tab on the top of the tank.
  • Fill up with e-liquid.
  • Close the tab.
  • You're good to go again with 10 mL of vaping time.

Compatibility

Vast Tri-Core cartridges are specially designed for the Vaporesso Vast pod kit.

When should you replace your Vast Tri-Core cartridge?

As the coils are built directly into the pod, they cannot be replaced separately. When the coil reaches the end of its life, the whole cartridge therefore needs to be changed. A few signs tell you it's time to fit a new one:

  • flavours become less precise or less intense
  • vapour production decreases
  • an off-taste starts to appear
  • a burnt taste can be noticed

Lifespan will depend on how often you vape, the mode used and the composition of your e-liquid. Very sweet recipes tend to clog coils more quickly.

Capacity (ml)
10ml
Hardware format
Drip Tip Not replaceable
Type of inhalation
MTL, RDL
Fill type
Top Filling
Packaging
Pack of 2 units
Compatible coils
Built-in coil
Country of manufacture
made in China
Imported by
PLAYSURE SA
close

Wishlist