Cartridges Xlim ABT Unitech 3.0 – OXVA | x3 Pack

  • New
  • Coming soon
Cartridges Xlim ABT Unitech 3.0  – OXVA | x3 Pack
Cartridges Xlim ABT Unitech 3.0  – OXVA | x3 Pack

Cartridges Xlim ABT Unitech 3.0 – OXVA | x3 Pack

Xlim ABT + UNITECH 3.0: the cartridge that guarantees a vape without a hitch. 🛡️💨

CHF13.90
At odds
Tax included
Choice
Cartridges Xlim ABT Unitech 3.0  – OXVA | x3 Pack
Cartridges Xlim ABT Unitech 3.0 – OXVA | x3 Pack
Choice : 0.4 ohm
CHF13.90
At odds
Tax included

Let me know when the product is available

Free delivery from 29,90CHF purchase

Complementary products

Xlim Pro 4 Pod Kit – All colours
3ml 1800mAh MTL RDL

Xlim Pro 4 Pod Kit – OXVA Xlim Pro 4 Pod Kit – OXVA

Price CHF34.90
  • New
  • Coming soon
Price CHF34.90
In re-supply
Color
Read more

OXVA Xlim ABT UNITECH 3.0 cartridges: the end of dry hits

The Xlim ABT cartridges from OXVA bring together two technologies for a more relaxed vape. ABT (Anti-Burn Tech) monitors the e-liquid level: if it gets too low, heating is cut before the coil runs dry and a refill alert is displayed. No more nasty burnt surprises. (ABT protection is only active with the Xlim Pro 4 kit).

Not forgetting UNITECH 3.0, OXVA's technology that promises ultra-fast priming, intense flavours and improved leak resistance for cleaner pockets.

Each cartridge has a 3 mL top-fill tank and an integrated coil. When it reaches the end of its life, you simply move on to the next one. Just the thing to make life easier on any pod in the Xlim range.

Cartridges sold in packs of 3.

The key features of the Xlim ABT UNITECH 3.0 cartridges

  • ABT (Anti-Burn Tech): heating is cut when the e-liquid level is too low, to prevent dry hits (only with the Xlim Pro 4).
  • UNITECH 3.0: fast priming, more pronounced flavours and improved leak resistance.
  • 3 mL tank for generous autonomy.
  • Top filling without having to unclip the cartridge from the pod.
  • Four coil resistances available (0.4, 0.6, 0.8 and 1.2 ohm) to go from RDL to MTL.
  • Pack of 3 cartridges to keep you covered for a good while.

ABT: protection against dry hits

A dry hit is that moment when you draw on an almost empty cartridge and your pod serves up a horrible burnt taste. Vaping veterans know this mishap all too well.

ABT (Anti-Burn Tech) is here to prevent it: thanks to intelligent e-liquid level detection, the device spots a low or empty level, cuts activation before the coil heats up dry, then prompts you to refill your cartridge.

Good to know: ABT protection is only active with an ABT-compatible device, such as the Xlim Pro 4. On the other devices in the range, the cartridges work normally, but without this safeguard.

UNITECH 3.0: for an optimal experience

UNITECH 3.0 is OXVA's little extra. It delivers rich, consistent flavours in every puff, faster priming of the coil (30 seconds after filling, according to OXVA), and improved leak resistance, so no more e-liquid all over your fingers.

In short: a cartridge that greatly improves your everyday vaping.

A 3 mL tank with top filling

Each Xlim ABT cartridge has a 3 mL tank. It is filled very simply from the top, without even removing the cartridge from the pod.

How do you fill your Xlim ABT cartridge?

  • open the silicone tab on top of the tank
  • fill the tank with your favourite e-liquid
  • close the filling hole carefully
  • Important: with a new cartridge, let the coil soak for a few minutes before vaping. Even if the manufacturer claims around 30 seconds, it is always better to take your time.

Xlim ABT cartridge compatibility

The Xlim ABT cartridges keep the format of OXVA's XLIM platform. They are therefore compatible with every pod in the Xlim range.

Please note, however, that the 0.4 ohm version requires more power and so cannot be used with first-generation Xlim, SE and SQ pods, which are limited to 25 W.

Which resistance should you choose?

The cartridges come in several resistances, from airier RDL vaping to a tighter MTL draw:

  • 0.4 ohm: RDL vape with impressive vapour production – 26 to 30 W – recommended PG/VG ratios from 50/50 to 30/70 – recommended nicotine strengths up to 6 mg/mL
  • 0.6 ohm: RDL vape offering a good balance between flavour and vapour – 20 to 25 W – recommended PG/VG ratios from 50/50 to 40/60 – recommended nicotine strengths up to 12 mg/mL
  • 0.8 ohm: fairly open MTL vape – 12 to 16 W – recommended PG/VG ratio of 50/50 – recommended nicotine strengths up to 20 mg/mL
  • 1.2 ohm: tighter MTL vape – 10 to 12 W – recommended PG/VG ratios from 70/30 to 50/50 – recommended nicotine strengths up to 20 mg/mL

When should you replace your Xlim ABT cartridge?

As the coil is built directly into the tank, it cannot be replaced separately. When it reaches the end of its life, you therefore need to change the whole cartridge. OXVA indicates a lifespan of around 2 to 3 weeks, depending on use.

A few signs generally tell you it's time to fit a new one:

  • flavours become less precise or less intense
  • vapour production drops
  • an unpleasant aftertaste starts to appear
  • a burnt taste appears

Lifespan will depend on how often you vape, the power you use and the make-up of your e-liquid. Very sweet recipes tend to clog coils more quickly.

Capacity (ml)
3ml
Hardware format
Drip Tip Not replaceable
Type of inhalation
MTL, RDL
Fill type
Top Filling
Packaging
Pack with 3 units
Compatible coils
Built-in coil
Country of manufacture
made in China
Imported by
PLAYSURE SA
close

Wishlist