Gen 80S Kit iTank 2 - Vaporesso

5ml 18650 80W DTL

Vaporesso is back with its Gen 80S kit that offers new colors and is now crowned with the clearomizer iTank 2! 40% lighter than other boxes on the market, you can no longer work your biceps every time you vape. The Gen 80 S has a soft touch coating that offers an excellent grip and a pleasant grip. It is therefore in an unparalleled comfort that you can take advantage of everything that this kit has in the belly.

Its maximum power of 80 watts to start with, which is powered by an 18650 battery (not included) and which you can control thanks to the excellent Axon chipset embedded in the machine. You will find four operating modes which we will discuss in more detail below. All these settings are easily done thanks to a 0.96" color TFT screen offering a good readability.

To complete this kit, the Gen 80S box is accompanied by the iTank 2 which will provide you with a generous steam and a 5 ml tank. The restitution of flavors is ensured by a compatibility with the GTi coils of Vaporesso.

Warning this product requires a battery
5ml 18650 80W DTL

Kit E-cigarette Gen 80S iTank 2 by Vaporesso

kit Gen 80S iTAnk 2 de Vaporesso

This kit Vaporesso is composed of the box Gen 80S which arrives in new colors of the most sober to the most flamboyant, with, for companion the clearomizer iTank 2. This box Gen 80S requires a 18650 battery (not included), and offers a maximum power of 80W controllable via its Axon chipset of great responsiveness. You will have understood, this box Vaporesso has what to satisfy your desires if you are a vaper who appreciates a voluminous vapor. With a great lightness, the Gen 80S box has a soft touch coating very pleasant in hand and will avoid fingerprints so that your box is always shown in its best light.

For flavors, you can count on the iTank 2 clearo and its compatibility with the GTi coils of Vaporesso. The iTank 2 has a 5 ml tank and its drip tip 810 announces the color, big clouds of steam in perspective. To put you directly in the bath, you will receive in this kit two GTi coils, one of 0.2 ohm and another of 0.4 ohm.

Box Gen 80S: the power in all lightness

The Gen 80S box from Vaporesso is back in force with brand new colors for all tastes, a lightness still unmatched and a soft touch grip for optimal handling. Just install a 18650 battery (not included) and you're off for DL vape sessions with plenty of steam thanks to its 80W of maximum power. To govern all these watts, you can rely on the Axon chipset and its various modes of vape that you can set simply through the TFT screen of 0.96" which allows a good visibility.

Chipset Axon de la box Gen 80S de Vaporesso

  • Watts mode: the most popular mode, it allows you to set your power manually from 5 to 80W according to your tastes and especially according to the value of your coil (respect the power range indicated on your resistance).
  • Pulse mode: This mode sends a pulse every 0.02 seconds to optimize the flavors.
  • F(t) mode: Mode that recognizes the coil installed and automatically adapts the power of the box for an optimal rendering, this mode is ideal for beginners.
  • DIY Mode: For experts who like to make their own custom vapor, this DIY mode includes VV, VT, CCW, SP, WV and Bypass modes.

Even though the Gen 80S box comes with the iTank 2, its pin 510 allows it to go elsewhere. It is up to you to put the clearomizer of your choice with a maximum diameter of 25 mm to remain flush.

Clearomizer iTank 2 Vaporesso, big steam

In this kit, find the new version of the clearomizer iTank Vaporesso. The iTank2 is equipped with a drip tip 810, so you already know that we are here on a large volume steam. The bottom airflow is adjusted with a ring located under the tank. You can vary the sensations by enjoying a direct inhalation vape with a more or less tight draw.

Level filling, nothing could be simpler, the clearo iTank 2 has a button that opens the sliding top cap automatically and it is still quite classy. After filling your tank of 5 ml, you will only have to put the top cap in place and here you go for a nice vaping session.

To enjoy your new toy directly, you will receive in this kit two GTI mesh coils. The mesh resistor of the GTI coils promotes an excellent restitution of flavors and clouds of great magnitude for a subohm vape quality.

- GTi mesh 0.20 ohm: aerial vape DL - to use between 60 and 75W - ratio 50PG/50VG to 20PG/80VG

- GTi mesh 0.40 ohm: aerial vape DL - to use between 50 and 60W - ratio 50PG/50VG to 20PG/80VG

Filling the clearomizer iTank 2 included in the kit Gen 80S Vaporesso :

Remplissage du clearomiseur iTank 2

  • Press the button to open the top cap.
  • Pour the e-liquid into the tank.
  • Close the top cap (if the coil is new, wait about ten minutes before vapourizing the time that the cotton soaks well)

Replace the coil of the iTank 2 Vaporesso:

Changer de résistance sur l'iTank 2

  • Unscrew the base of the clearomizer.
  • Insert the coil of a simple pressure.
  • Screw the base of the clearomizer.

Dimensions of the kit Gen 80S Vaporesso :

Dimensions du kit Gen 80S iTank 2

The kit Gen 80S Vaporesso contains:

  • 1 box Gen 80S
  • 1 clearomizer iTAnk2
  • 1 GTi Mesh coil of 0.20 ohm
  • 1 GTi Mesh coil of 0.40 ohm
  • 1 spare pyrex
  • 1 USB-C cable
  • 3 o rings
  • 1 user manual
  • 1 warranty card
Capacity (ml)
Hardware format
Battery type
Maximum power
Type of inhalation
24,5 mm
Bottom Airflow, Adjustable
Fill type
Top Filling
Compatible coils
GTi Coils
With settings
Charging possible via USB
Charging connection
Country of manufacture
made in China

Complementary products

In stock
Tax included

Free delivery from 29,90CHF purchase
If you don't smoke, don't vape