Pod Kroma Z - Innokin

The Kroma-Z kit from Innokin: A vape in air or tight draw while elegance!

You are a beginner or already confirmed and you do not know what to choose between tight draw and air draw? Then the pod kit Kroma Z from Innokin is perfect! In addition to that, it is compact and autonomous, while being elegant as all electronic cigarettes Innokin

An elegant and compact design for the pod Innokin kroma-Z

Made of magnesium alloy, the Innokin Kroma-Z is compact, sturdy and light with ergonomic curves bringing comfort in the palm of the hand. Moreover, like all Innokin pods, this kit shines by its elegance and its colors, like its predecessors before it, notably the Kroma-R kit.

A versatile pod, the Kroma Z kit from Innokin

The Innokin Kroma Z vape can be used both in indirect inhalation (tight draw - MTL) and direct inhalation (air draw - RDL). How? Thanks to its adjustable airflow via a wheel located on the back. The side opening is located on the top of the pod. Thus, you can vary the draws and therefore the sensations of vape. But also, the particularity of the Kroma Z Innokin comes from the fact that you have an airflow control ring MTL (for use with Zenith resistors 1 ohm, 1.2 ohm and 1.6 ohm) and another RDL that are interchanged directly on the cartridge. Finally, you are delivered a drip tip RDL and another MTL for more versatility.

But also, the Innokin Kroma Z pod is compatible with all Innokin Zenith resistors from 0.3 to 1.6 ohm. With these, you can vary the modes of vape

The Innokin Kroma Z pod: A stand-alone ecig and its small +

Thanks to its integrated battery of 3000 mAh, your pod has a great autonomy. In addition, the recharge is fast with the USB-C cable delivered

Regarding the power, it can go up to 40W. Doesn't sound like much? You will quickly forget it as Zenith resistors are jewels of versatility and low energy consumption. This power is adjustable via theLCD screen that displays the power of the pod, the power of the inserted resistance, the autonomy of the integrated battery and the number of puffs.

The safety is not left out with protections against overheating and overloading.

The pod kit kroma-Z Innokin is accompanied by Zenith resistors for more versatility

The removable 4.5 ml cartridge is made of PCTG. It is attached to the pod with a powerful magnet for a secure and solid. Changing the cartridge is very simple. To do this, simply remove the cartridge from the pod, pushing against the filling tab of e-liquid.

The filling is done from the side, more precisely on the front of the pod, quickly and easily. Simply remove the silicone cap to insert the pipette of your e-liquid. Finally, close the tab and wait a few minutes so that the resistance is soaked in liquid. Prefer an e-liquid with a high PG (minimum 50%).

The Kroma-Z Innokin pod is compatible with all zenith Innokin resistances (also called Z coils) of 0.3 ohm, 0.48 ohm, 0.5 ohm, 0.8 ohm, 1.0 ohm, 1.2 ohm and 1.6 ohm. A large choice for a great versatility of pulling. 2 Zenith resistors are delivered:

- Zenith mesh resistance of 0.3 ohm: use between 30 and 40W

- Zenith resistor 0.8 ohm: use between 15 and 18W

The innokin Kroma Z kit is delivered with :

- 1 Kroma Z pod

- 1 Kroma Z cartridge of 4.5 ml

- 1 Zenith resistor 0.3 ohm

- 1 Zenith resistor of 0.8 ohm

- 1 drip tip 510 MTL

- 1 drip tip 510 RDL

- 1 USB-C cable

- 1 user manual

The dimensions of the pod Kroma Z from Innokin :

- Height: 114 mm

- Length: 37 mm

- Width: 28,5 mm