Wenax K2 Pod Kit - Geekvape

2ml 1000mAh Internal battery 18W MTL

Geekvape spoils us with this Wenax K2 pod that replaces the K1 at the drop of a hat by offering an autonomy almost doubled while preserving the ultra-thin design that we know. Very easy to handle, the Wenax K2 pod is perfect to replace the cigarette and disposable puffs or to be used as a back-up pod for lovers of big gear wanting to feel lighter for a day. Matte or glossy, pink or blue, there is a Wenax K2 for all tastes if you appreciate the tight draw vape (MTL) brought by the Wenax K1 cartridges that accompany it in this kit (0.8 ohm and 1.2 ohm for 2 ml capacity).

With its integrated battery of 1000 mAh that can offer you up to two days of vaping and its fast recharge via USB-C (cable provided), the Wenax K2 will become a real companion of everyday life. This new Wenax also sports an adjustable airflow for an even more precise vape according to your preferences. Learn more about your next podmod just below.

2ml 1000mAh Internal battery 18W MTL

Pod Wenax K2 of Geekvape: the e-cig featherweight

Pod Wenax K2 Geekvape

With just 36 g at the weight and a length of 115 mm for a thickness of only 11 mm, the pod Wenax K2 of Geekvape is quickly forgotten in the pocket. However, its ultra-smooth aluminum coating and its matte or glossy colors, in addition to its performance, mean that you will rarely put it away. Check your pockets anyway, the Wenax K2, despite all its qualities, does not stand up well to a turn in the washing machine.

Its simple design reflects its easy operation. Here, no screen, just a button to vaper (or not, the Wenax K2 also works in autodraw) and a small adjustable airflow for a precise vape. The pod Wenax K2 will seduce more than one (e) with its small size and its beautiful finishes for a simple and accessible vaping as we like.

The pod Wenax K2, the inexhaustible

Very small, but also and above all very powerful, the Wenax K2 hides an internal battery of 1000 mAh that can accompany you up to 48 hours on a single charge with an average use. The relentless vapers will be able to draw one day the fingers in the nose. Your battery level is indicated by LEDs and the battery recharges in no time via its USB-C port (cable included):

  • Green: 100% to 70%.
  • Blue: from 70% to 30%.
  • Red: from 30% to 0%.

Batterie du pod Wenax K2 de Geekvape

With a maximum power of 18 W, ideal for indirect inhalation for which this pod Wenax K2 is designed, the latter also offers 3 levels of preset power to vary the sensations, these are also indicated by LEDs:

  • White: low power.
  • Blue: medium power.
  • Red: high power.

These are presets offering different sensations, the rest is done automatically by the Wenax K2 which recognizes the coil installed and adapts the watts automatically.

Wenax K1 cartridges still compatible!

Backward compatibility is always a pleasure. That's why Geekvape takes back the cartridges of the previous Wenax K1 by offering them all the same an improvement of the restitution of the flavors and their life span. In this kit your pod Wenax K2 arrives well accompanied by two cartridges Wenax K1 (0.8 ohm and 1.2 ohm) so you can test all the nuances of MTL vape of your e-cig from its arrival.

The Wenax K1 cartridges have a capacity of 2 ml and are equipped with integrated coils, so once the coil is worn out, you do not bother and replace the entire cartridge. Stock up on Wenax K1 cartridges right here → Wenax K1 cartridges.

- Wenax K1 0.80 ohm cartridge : MTL draw - ratio 60PG/40VG to 50PG/50VG - compatible nicotine salts and high nicotine levels.

- Wenax K1 1.20 ohm cartridge: very tight MTL draw - ratio 70PG/30VG to 50PG/50VG - compatible with nicotine salts, CBD and high nicotine levels.

How to fill your cartridge Wenax K1 Geekvape :

Remplissage du pod Wenax K2

  • Remove cartridge from the battery.
  • Remove the silicone tab and fill.
  • Close the silicone tab and reclip on the battery.
  • Let stand for 10 minutes if the cartridge is new.

How to replace your Wenax K1 Geekvape cartridge :

Remplacer une cartouche sur le pod Wenax K2

  • Remove the cartridge from the pod by pulling on it.
  • Clip another cartridge on the battery.

The dimensions of the Geekvape Wenax K2 pod:

Dimensions du pod Wenax K2

The Geekvape Wenax K2 pod kit contains:

- 1 Pod Wenax K2

- 1 Wenax K1 cartridge of 0.80 ohm (preinstalled)

- 1 Wenax K1 cartridge of 1.20 ohm

- 1 USB-C cable

- 1 user manual

Capacity (ml)
Hardware format
Pod system
Battery life (mah)
Battery type
Internal battery
Maximum power
Type of inhalation
Transversal Position (Side-Airflow), Adjustable
Fill type
Side Filling
With settings
Charging possible via USB
Charging connection
Country of manufacture
made in China

Complementary products

In stock
Tax included

Free delivery from 29,90CHF purchase
If you don't smoke, don't vape