Clearomizer Melo 4S - Eleaf

4ml DTL MTL Up to 25mm
Clearomizer Melo 4S - Eleaf
Clearomizer Melo 4S - Eleaf
Clearomizer Melo 4S - Eleaf
Clearomizer Melo 4S - Eleaf
Do you have a question?Do you have a question about this product?

After the clearomizer Melo 4, find the tank Melo 4S fromEleaf even more powerful! It is compatible with the new EC-A resistors with AST and mesh technology. The program? A DL air draw with large clouds of steam tasty! In addition, these coils have a longer life and heat up in only 0.001 s. However, the Melo 4S is also compatible with Eleaf EC resistors (sold separately) and in particular the ECML resistor of 0.75 ohm for a MTL draw. Theadjustable airflow allows you to adjust the draw for a more or less airy vape.

This Eleaf clearomizer is easy to use! The filling of the leak-proof tank of 4 ml is done from the top(top-filling).

Combine your tank with a box of at least 25 mm wide for a flush kit

4ml DTL MTL Up to 25mm Top Filling

The Melo 4S clearomizer, a jewel of performance and ease of use

Are you looking for an efficient and easy to use clearomizer? Look no further, you've found it! It is the Melo 4S tank from Eleaf! This one offers you an airy DL draw with big clouds of tasty vapor. Thanks to the 0.75 ohm ECML resistor (not included), you can enjoy a tighter draw. But it also shines with its ease of use, including top-filling and high performance, especially with the new AST technology of EC-A resistors.

The performance of the tank Melo 4S Eleaf

It is a powerful clearomizer that you will have in your hands. First of all, it offers an air draw DL to achieve large clouds of steam. In addition, the drip tip 510 promotes the excellent rendering of flavors of e-liquids. Results? Clouds of steam tasty! Theadjustable airflow allows you to adjust the airflow according to your preferences, for a more or less airy vape

The Melo 4S comes with 2 new eleaf EC-A resistances

- 0.30 ohm EC-A resistor (mesh): DL air vape - use between 30 and 50W - ratio 50PG/50VG or 30PG/70VG

- 0.50 ohm EC-A resistor (mesh): DL air vape - to be used between 20 and 40W - ratio 50PG/50VG or 30PG/70VG

However, you can also use the following EC-A resistor (sold separately) :

- 0.15 ohm EC-A resistor (mesh): very airy DL vape - to be used between 40 and 70W - ratio 50PG/50VG or 30PG/70VG

EC-A coils for the Melo 4S

These coils are innovative! Indeed, these coils heat up faster, in 0,001 s. But also, they have a longer lifetime. In addition, the EC-A resistors use the new AST technology (innovative AST steel interior) and mesh technology. The result? Big clouds of very tasty vapor. The Melo 4S tank is compatible with Eleaf's EC resistors (sold separately) :

- 0.30 ohm EC resistor DL air vape - to be used between 30 and 80W - ratio 50PG/50VG or 30PG/70VG

- 0.50 ohm EC resistor Aerial vape DL - to be used between 30 and 100W - ratio 50PG/50VG or 30PG/70VG

- 0.30 ohm EC2 resistor (Kanthal) DL aerial vape - to be used between 30 and 80W - ratio 50PG/50VG or 30PG/70VG

- 0.50 ohm EC2 resistor (Kanthal) DL aerial vape - to be used between 30 and 100W - ratio 50PG/50VG or 30PG/70VG

- Resistance ECL 0.18 ohm (SS316): very aerial vape DL for temperature control - to use between 50 and 80W - ratio 50PG/50VG or 30PG/70VG

- ECML resistor of 0.75 ohm MTL - to be used between 8 and 25W - ratio 50PG/50VG or 70PG/30VG

- 0.15 ohm EC-M resistor (Kanthal ): DL air vape - to be used between 30 and 75W - ratio 50PG/50VG or 30PG/70VG

- EC-S resistor of 0.60 ohm (SS316L) DL aerial vape for temperature control - use between 15 and 30W - ratio 50PG/50VG or 30PG/70VG

- EC-N resistor of 0.15 ohm (kanthal) DL very airy vape - to use between 30 and 70W - ratio 50PG/50VG or 30PG/70VG

The ease of use of the clearomizer Melo 4S Eleaf

The Melo 4S tank is a 4 ml tank with an easy anti-leak filling from the top(top-filling). To do this, remove the top cap removable

As for the replacement of the resistance, remove the clearo of the battery, then the base of the tank before removing the damaged coil. Prime a new resistor and place it. Finally, replace the base and tank, fill it and wait 10 minutes before vaping.

With what equipment to use the clearomizer Eleaf Melo 4S?

With its sober and modern design, the Melo 4S can be associated with most of the boxes on the market thanks to its pin 510 (connector). However, for a flush kit, prefer a box at least 25 mm wide. For example, use the eleaf iJust 3 tube batterythe eleaf iStick Rim box or the eleaf Pico 25 box.

The clearomizer Melo 4S by Eleaf is delivered with :

- 1 Melo 4S tank

- 1 EC-A resistance of 0.30 ohm

- 1 EC-A resistor of 0.50 ohm

- 1 set of spare gaskets

- 1 set of instructions for use

Characteristics of the Eleaf Melo 4S tank :

- Dimensions: 51 mm x 25 mm

Capacity (ml)
4ml
Type of inhalation
DTL, MTL
Diameter
Up to 25mm
Airflow
Bottom Airflow, Adjustable
Fill type
Top Filling
Compatible coils
Coils EC (EC-N, EC-M, EC 2, EC, EC-S)
Country of manufacture
made in China

For any questions regarding your order or product availability please use our contact form

* Mandatory field
Be the first to ask a question about this product
View the trust certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
  • No inducements have been provided for these reviews
  • Reviews are published and kept for a period of five years
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
  • The reasons for deletion of reviews are available here.
Sort reviews by :

4 /5

Based on 1 customer reviews

  • 1
    0
  • 2
    0
  • 3
    0
  • 4
    1
  • 5
    0

Maik B. published the 23/01/2023 following an order made on 09/01/2023

4/5

Sehr guter Tank, am besten kombiniert mit Vaporesso EUC Coils.

×
CHF22.90
In stock
Tax included

Free delivery from 29,90CHF purchase
If you don't smoke, don't vape

close

Wishlist