Clearomizer Guroo 200 - Aspire

4ml 5ml DTL Up to 27mm
  • Special offer
Clearomizer Guroo 200 - Aspire
Clearomizer Guroo 200 - Aspire
Clearomizer Guroo 200 - Aspire
Clearomizer Guroo 200 - Aspire
Clearomizer Guroo 200 - Aspire
Do you have a question?Do you have a question about this product?

The Guroo clearomizer fromAspire is THE tank that will revolutionize your vape experience and especially the change of resistance. Its system ''Pop-up'' allows the coil to remove itself not with a magic wand but by pinching the airflow ring and then pushing it down. A real innovation!

The DL air draw provides an exceptional vape moment filled with dense clouds of steam and incredible flavors. For this, use the Guroo Aspire sub-ohm resistors (supplied) manufactured with mesh technology for excellent flavor rendition. The filling of the pyrex tank of 4 ml or 5 ml is done from below(top-filling)

For an aesthetic kit (flush), assemble your clearomizer Guroo 27 mm in diameter with boxes of at least 27 mm wide.

4ml 5ml DTL Up to 27mm Top Filling

The clearomizer Guroo 200 of Aspire, the innovative pop-up resistance change

One more atomizer in the family Aspire, but not the least, because the clearomizer Guroo 200 is innovative by its resistance system that removes itself. Its qualities do not stop here! The Guroo 200 will make fans in the cloud chasers! Indeed, this one offers a DL draw for incredible clouds of steam and what is more with theexcellent rendering of flavors. All with a stainless steel design with quality finishes! Again a faultless Aspire!

Big clouds of steam with the clearomizer Aspire Guroo 200

Equipped with a drip tip 810, the Guroo 200 is perfect for a DL air draw (direct inhalation) and therefore make big clouds of tasty steam. Indeed, the tank Guroo 200 Aspire comes with 2 resistances Guroo sub-ohm with mesh technology that promotes the excellent restitution of flavors of e-liquids:

- Resistance Guroo 0.15 ohm (kanthal mesh): very cloudy DL vape - to use between 60 and 70W - ratio 30PG / 70VG

- Resistance Guroo 0.30 ohm (mesh): DL vape hotter and a little less cloudy than the version of 0.15 ohm but more flavorful thanks to its smaller chimney - to use between 40 and 50W - ratio 30PG/70VG

Beyond the resistors, you will of course find an adjustable airflow (airflow ring at the base of the clearo) to adjust the airflow to your needs and preferences. The airflow system is very precise for an incredible vape moment(dense vapor + exceptional flavors).

Finally, let's move on to the tank. You find a straight pyrex of 4 ml or a pyrex bulb of 5 ml. Its anti-leak filling is ultra easy and is done from the top(top-filling). To do this, press the top cap and turn to open and access the filling hatch. Use e-liquids ratio 50PG/50VG or 30PG/70VG.

width=691

The tank Guroo 200 Aspire: A system of resistance replacement at the cutting edge of technology

The change of resistance is innovative and especially facilitates your life with the system Pop-up. You'll see it's great! Here are the steps to change resistance Guroo Aspire:

- Remove the top-cap of the tank Guroo 200

- Keep your clearo straight while pinching the airflow ring and push it down. It's magic! The resistance rises immediately

- Bait a new resistor and place it by pushing it in the slot

- After replacing everything, wait 10 minutes before vaping so that the cotton has time to soak in e-liquid

With what equipment to use the clearomizer Aspire Guroo 200?

The clearomizer Guroo 200 of 27 mm in diameter is equipped with a pin 510 (connectivity). For a flush kit (aesthetics), you can combine it with your favorite box ofat least 27 mm wide. Regarding the coils, use the Guroo resistors from Aspire. In case your pyrex breaks, make a small stock of guroo replacement tanks of 4 ml or 5 ml.

The clearo Guroo Aspire comes with :

- 1 clearomizer Guroo 200

- 1 Guroo resistance of 0.15 ohm (preinstalled)

- 1 Guroo resistance of 0.3 ohm

- 1 replacement pyrex

- 1 set of replacement seals

- 1 set of instructions for use

The characteristics of the tank Aspire Guroo 200 :

- Dimensions: 57 x 27 mm

- Weight: 85 g

Capacity (ml)
4ml, 5ml
Type of inhalation
DTL
Diameter
Up to 27mm
Airflow
Bottom Airflow, Adjustable
Fill type
Top Filling
Country of manufacture
made in China

For any questions regarding your order or product availability please use our contact form

* Mandatory field
Be the first to ask a question about this product
- 25% CHF33.50
CHF25.13
In stock
Tax included

Free delivery from 29,90CHF purchase
If you don't smoke, don't vape

close

Wishlist