- Special offer
GTi Mesh coils - Vaporesso | Pack x5 GTi Mesh coils - Vaporesso | Pack x5
- New versions
Here is now the kit Target 80 Tank Edition of the brand Vaporesso, for a direct inhalation! This one is easier to use thanks to its Axon 2.0 chipset. It has several modes such as VW mode, F(t) and pulse.
Incredible, this kit Vaporesso of 80W is compact, powerful and has a very excellent autonomy of 3000 mah. Set your mod with a color TFT screen of 0.96".
Regarding the iTank fill up to 5 ml of eliquid and adjust the airflow. It is equipped with its new Turbo Airflow system that combines the entry of three ports located on the bottom, allowing a more fluid air intake. The filling is done just by pushing the top-cap. Prefer a ratio 30/70 PG / VG or 50PG/50VG for your eliquid.
Finally, 2 mesh coils are provided: the GTi 0.2 ohm Mesh and the GTi 0.4 ohm Mesh.
The Vaporesso 80W kitis compact, powerful and has a very excellent autonomy of 3000 mah. The box can vaper up to 80 watts. This kit is intended for direct inhalation (DL - air draft).
The box is made on a solid metal frame accompanied by a woven fabric resistant to water and which reinforces the use in outside. Know that it has an excellent autonomy of 3000 mah for long hours of vape. The box offers several functions such as the pulse mode that gives a constant pulse throughout your inhalation. The F(t) mode allows a more precise control of the heating rate and a complete vaporization of different flavors at different temperatures. The VWN mode which is the most used basic mode, it allows to vaporize between 5 watts and 80 watts. Finally, the DIY mode makes it easy to manually adjust the options of the box.
Easily adjust your Vaporesso kit with its Axon 2.0 chipset and especially its very readable 0.96" TFT color screen and its switch located on the front of your box. If you want, you can update your chipset through a USB-C connection. It is also via this same cable that you can recharge your battery(5V/2A).
This tank, special direct inhalation (DL), can fill up to 5 ml of e-liquid. It measures 26 mm in diameter. Equipped with its new Turbo Airflow system that combines the entry of three ports located on the bottom, allowing a more fluid air intake. The drip-tip 510 can be changed by another more personal!
Filling the iTank is very easy and is done from the top: "top-filling" type. Just push the top-cap, fill with your favorite e-liquid and finally close the top cap. Regarding the ratio, prefer 30/70 PG / VG or 50PG/50VG.
Two new mesh coils are delivered with your kit Target 80 Tank Edition Vaporesso: the GTi 0.2 ohm Mesh (already preinstalled) and the GTi 0.4 ohm Mesh. The first one is used between 60 and 75 watts and the second one is used between 50 and 60 watts (a GTi 0,15 mesh coil will arrive in the next months).
Just like the filling, the change of the coil remains within the reach of all. To do this, unscrew the base of the clearomizer. Remove the burned coil and insert a new one. Screw the base back on. Wait a few minutes (10-15 minutes) before vaping so that the cotton in the coil soaks in e-liquid so as not to prematurely burn your coil.
- 1 box Target 80
- 1 clearomizer iTank 5 ml
- 1 GTi 0.2 ohm Mesh (already pre-installed)
- 1 GTi 0,4 ohm Mesh
- 1 replacement pyrex of 5 ml
- 1 spare gasket kit
- 1 USB-C cable
- 1 user's guide
- 1 warranty card
138.8 × 30.8 × 38.3 mm
Forbidden under 18 years old
Wishlist