Pod Doric 20W - Voopoo We look forward to hearing from you

The Doric 20W pod from Voopoo: An ultra tasty vape

The Doric 20W tubular ecig joins the pod family with its compact size, light weight and ease of use. The Doric offers a tight MTL draw rich in flavor. A perfect kit for beginners and nomadic vapers!

The design of the electronic cigarette Doric 20 Voopoo

The Doric make no exception! Made of aluminum alloy, it is ultra thin (124 mm high and 19 mm in diameter) and light (50 g). Under the battery, you find a non-slip coating so that your vape does not slip when you put it upright.

Its ergonomic tubular shape promotes an exceptional grip.

The pod Doric 20 Voopoo: A tight draw MTL

The Doric pod is delivered with 2 iTO resistances :

- ITO M2 1.0 ohm coil (kanthal mesh): tight MTL vape - To use between 10 and 14 watts - Ratio 80PG/20VG to 50PG/50VG - Compatible with high nicotine rate, CBD and nicotine salts

- ITO M3 1.2 ohm coil (kanthal mesh): MTL tight vape - For use between 8 and 12 watts - Ratio 80PG/20VG to 50PG/50VG - Compatible with high nicotine rate, CBD and nicotine salts

The mesh technology promotes both flavor and vapor production. This ecig offers an MTL air draw for exceptional flavors.

The replacement of coil is very simple with a pull-and-push system. Just pull the old coil, prime the new one and push it into the slot. Before vaping, wait 10 minutes.

Attention, it is necessary to change your coil about every 2 weeks depending on your use. Remember to replace your coil when you change flavor or you feel a burnt taste.

The precise adjustment of the airflow (with 3 slots) is done via the lever located above the charging port.

The ease of use of the ecigarette Voopoo Doric 20

On the Doric, you find a single button: the switch (fire button). The use is ultra simple! Either you vape by pressing the switch, or only by inhaling.

The power of the Doric goes up to 20W, while delivering a stable power. 3 power modes are at your disposal. The setting is done via 3 clicks on the switch. And the power setting is indicated by a color LED (just above the switch). The GENE chipset ensures all the necessary protections in case of short circuit, overload, overheating and excessive discharge.

The charge level of the built-in 1500 mAh battery is also indicated by the LED color. Recharge your pod quickly (within 1 hour) with the included USB-C cable (1.5A).

Even the 2 ml ITO leak-proof PCTG cartridge is easy to use. The filling is done on the side. To do this, remove the cartridge from the battery and then the silicone cap.

Here is what is delivered to you:

- 1 Doric 20 pod

- 1 ITO cartridge of 2 ml

- 1 ITO M2 1.0 ohm coil

- 1 ITO M3 1.2 ohm coil

- 1 USB-C cable

- 1 user manual

Doric 20 Voopoo pod features:

- Dimensions: 124 mm height x 19 mm diameter

- Weight: 50 g