Flexus Peak Pod Kit - Aspire

Aspire Flexus Peak Pod: style at its best

Aspire has done it again, offering us a podmod e-cigarette with a futuristic, elegant look. A perfect blend of simplicity and modernity, with its eye-catching chipset and a few small LEDs that put on a show with every inhalation. Extremely compact at 101.7 × 29.5 × 17 mm, the Flexus Peak pod slips easily into a pocket and feels great in the hand. You'll notice that the Flexus Peak has no buttons, operating with autodraw activation, so all you have to do to start vaping is inhale.

Available in a wide selection of colors, the Flexus pod can sport a sober look or be a little more eccentric, so all you have to do is find the one that suits you.

Aspire Flexus Peak Pod: Three power levels

For a vape just the way you like it, the Flexus Peak pod offers three power levels. Each power level is matched to the resistor you're using, so there's no need to panic if you're just starting out: you won't risk making a dumpling and burning your coil. To navigate between the different power levels, simply unclip and reclip the cartridge. The LED on the back of the pod indicates the active level.

• Red flashing: low wattage.
• Blue flashing: medium wattage.
• Green flashing: high wattage.

Peak Aspire Flexus Pod: Tailor-made sensations

In addition to its three wattage levels, the Flexus Peak pod also features an adjustable airflow for precise adjustment of airflow and a vape sensation perfectly tailored to your expectations. You'll be able to take full advantage of the different MTL and RDL draw nuances provided by the Flexus Peak pod.

Flexus Peak pod: long-lasting vaping

To ensure that your Flexus Peak pod is always up and running, Aspire has equipped it with a generous 1000 mAh internal battery for all-day vaping. Even if, on a day that's a little more stressful than the rest, you've put a bit of strain on your pod, it can recharge to 50% in just 15 minutes via USB-C with a charging current of 2A (cable supplied).

Flexus Peak cartridge for exceptional rendering

The flexus Peak cartridge included with your Flexus Peak pod features a 3-ml PCTG reservoir. Its reservoir is filled from the bottom by opening the silicone tab.

The cartridge is compatible with AF coils, both models of which you'll receive in your kit, so you can enjoy the wide range of sensations that the Flexus Peak can offer. AF resistors are renowned for their excellent flavor reproduction.

- 0.6 ohm AF coils (mesh and organic cotton): RDL draw (dense vapor) - use between 15 and 18W - ratio 60PG/40VG to 40PG/60VG - compatible with nicotine salts up to 10 mg/ml and standard liquids up to 9 mg/ml.

- 1.0 ohm AF coils (mesh and organic cotton): MTL tight draw (excellent flavor rendering) - use between 12 and 15W - ratio 50PG/50VG to 80PG/20VG - compatible with nicotine salts, CBD and high nicotine levels.

How to fill your Flexus Peak cartridge :

• Remove the cartridge from the Flexus Peak battery.
• Open the silicone tab, fill with e-liquid and close.
• Replace the cartridge on the battery.

How to replace a coil on your Flexus Peak cartridge:

• Remove the cartridge from the pod.
• Insert the coil under the cartridge.
• Replace the cartridge on the pod.
• If the coil is new, prime it well by letting it soak for ten minutes in a tank filled with e-liquid.

Dimensions of the Aspire Flexus Peak pod :

The Flexus Peak pod kit contains :

• 1x Flexus Peak pod
• 1x Flexus Peak cartridge
• 1x 0.6 ohm AF coil
• 1x 1.0 ohm AF coil
• 1x USB-C cable
• 1x user manual