Pod Gen PT80S - Vaporesso

4,5ml 18650 80W MTL DTL Multifunctional RDL
  • Flash sales
  • New versions
Pod Gen PT80S - Vaporesso
Pod Gen PT80S - Vaporesso
Pod Gen PT80S - Vaporesso
Pod Gen PT80S - Vaporesso
Do you have a question?Do you have a question about this product?

Vaporesso returns with a concentrate of technologies in a small box. It is the pod Gen PT80S! You will love it! The brand has managed to combine the filling trap with the adjustable airflow ring. This is the only cartridge to use this system! Incredible, you find a quadruple protection against leakage.

The pod is compatible with all GTX coils version 2 for a versatile draw: DL, RDL or MTL. The patented Morph-mesh technology of the coil promotes a homogeneous heating for exceptional flavours. The cotton cumulus is more aerated for a more durable resistance.

The vape works with a 18650 battery (not included). The responsive Axon chipset handles smart and VW modes. You can set the power between 5 and 80W via the0.91" OLED screen.

Equipped with SSS anti-leak technology, the 4.5 ml PCTG Xtank cartridge is filled from the side. The top airflow avoids leaks of eliquid.

The 4 layers of coating of the pod makes it light and pleasant in hand, as well as its ergonomic shape.

Warning this product requires a battery
4,5ml 18650 80W MTL DTL Multifunctional RDL

THE POD GEN PT80S OF VAPORESSO, AN INNOVATIVE VAPE!

Vaporesso made strong with its pod Gen PT80S! This small vape is a concentrate of technology. The brand has combined the trapdoor filling with the air intake. But not only! You find a quadruple leak protection. As well as the technology Morph-mesh and cotton cumulus. All for an exceptional vape moment!

Colour pod Gen PT80S Vaporesso

The performance of the electronic cigarette Gen PT80S Vaporesso

The Gen PT80S pod works with a 18650 battery (not included). This battery charges quickly via the included USB-C cable (5V/2A). However, we strongly recommend that you use an external battery charger to preserve the life of your battery.

This vape has a responsive Axon chipset which itself offers the following modes:

Smart mode: the mod detects the value of the resistance installed to adapt the power

VW mode: power setting between 5 and 80W

The settings are made via the OLED screen of 0.91". Through this same screen, visualize the level of charge of the battery, the mode used, the power set, the value of the resistance installed and the duration of the last puff.

Lightweight and elegant smart box pod gen PT80S Vaporesso

Vaporesso Xtank anti-leak cartridge

The Xtank cartridge magnetic and PCTG of 4.5 ml is filled on the side. Incredible! Vaporesso has combined both the filling door and the adjustable airflow ring. This is the only cartridge to use this system! To fill, you just have to turn the airflow ring and open the silicone cap. The top airflow prevents leaks.

But also, the cartridge is equipped with SSS anti-leak technology.

Anti-leak technology Xtank Vaporesso clearomizer

The coil of the ecigarette Gen PT80S Vaporesso with Morph-mesh structure and cotton cumulus

The cartridge is compatible with GTX coils (version 2) 2 of which are included in the delivery:

GTX coil of 0.15 ohm (mesh): air draft DL - to use between 60 and 75W - ratio 30PG/70VG or 20PG/80VG

GTX coil of 0.3 ohm (mesh): DL overhead draw - to be used between 32 and 45W - ratio 50PG/50VG to 20PG/80VG - compatible with low nicotine levels (from 0 to 6 mg/ml)

However, you can also use the following coils (sold separately) :

0.2 ohm GTX coil (mesh): airflow DL (abundant vapor and fast heating) - to use between 45 and 60W - ratio 50PG/50VG to 20PG/80VG - compatible with low nicotine levels (from 0 to 6 mg/ml)

0.4 ohm GTX coil (mesh): RDL draw - to be used between 26 and 32W - ratio 50PG/50VG or 30PG/70VG or 40PG/60VG

0.6 ohm GTX coil (mesh): RDL draw (balance between flavors and steam) - to use between 20 and 30W - ratio 50PG/50VG or 30PG/70VG or 40PG/60VG - compatible nicotine rate from 0 to 9 mg/ml

0.8 ohm GTX coil (mesh): RDL draw - to be used between 12 and 20W - ratio 50PG/50VG - compatible nicotine rate from 0 to 18 mg/ml

1.2 ohm GTX coil (regular): MTL tight draw - to be used between 8 and 12W - ratio 50PG/50VG to 80PG/20PG - compatible with nicotine salts, CBD and high nicotine levels (from 0 to 18 mg/ml)

Thus, you can enjoy an air draw DL, RDL or tight MTL according to your preferences. These coils have a triple silicone to prevent leakage of eliquid.

To change the coil, remove the cartridge from the pod and then the damaged coil. Prime a new coil and insert it before filling the tank, repositioning the cartridge and waiting 10 minutes to vape.

Attention, it is necessary to change your coil about every 2 weeks depending on your use. Remember to replace your coil when you change flavour or if you feel a burnt taste.

GTX Vaporesso morph-mesh technology

But also, and not least, these coils use the patented Morph-mesh structure which allows a more homogeneous heating and incredible flavours. The ratio flavour / steam is only better. But that's not all! The coil contains a cotton cumulus which has the particularity of being more aerated allowing the eliquid to circulate better. Result? A more durable coil.

Cotton cumulus GTX coils Vaporesso

The incredible design of the vape Gen PT80S of Vaporesso

The kit Gen PT80S is elegant and soft to the touch. Its 4 layers of coating makes it light and pleasant in hand. As for its ergonomic shape, it offers an excellent grip.

Design and comfort pod Gen PT80S Vaporesso

The Gen PT80S pod comes with:

- 1 Gen PT80S battery

- 1 Xtank cartridge of 4.5 ml

- 1 GTX coil of 0.15 ohm (version 2)

- 1 GTX coil of 0.3 ohm (version 2)

- 1 USB-C cable

- 1 user manual

The characteristics of the ecig Gen PT80S Vaporesso :

- Dimensions: 132 mm x 30 mm x 29 mm

Capacity (ml)
4,5ml
Hardware format
Pod system, Mini format - discreet
Battery type
18650
Maximum power
80W
Type of inhalation
MTL, DTL, Multifunctional, RDL
Fill type
Side Filling
Country of manufacture
made in China
Labels
New versions

For any questions regarding your order or product availability please use our contact form

* Mandatory field
Stéphanie 2023-06-05 15:19:29
est-ce compatible avec les résistances RÉSISTANCES Z-COIL - ZENITH & ZLIDE - INNOKIN | PACK X5 ?
FREEVAP
Bonjour, le kit pod Gen PT80S est uniquement compatible avec les résistances GTX V2.
Belle journée et bonne vape 🙂
1/1
Pack with 5 units

GTX coils - Vaporesso | Pack x5

In stock
Price CHF12.50
  • New versions
In stock
Price CHF12.50
Choice
Read more
- 20% CHF39.90
CHF31.92
In stock
Tax included

Free delivery from 29,90CHF purchase
If you don't smoke, don't vape

close

Wishlist