- Special offer
Drag 3 TPP X Kit - Voopoo
Forbidden under 18 years old
Voopoo returns with its Drag 3 TPP X kit! It consists of the Drag 3 box with a beautiful look and the clearomizer TPP X for a DL air draw with very dense and tasty steam. The clearo is composed of the magnetic cartridge TPP X 5.5 ml and the adapter 510. This is compatible with the TPP coils. The filling is done on the side without the need to remove the cartridge
The mod works with 2 18650 batteries (not included) which offer a great autonomy. Its latest generation GENE.FAN 2.0 chipset is ultra responsive. You find the Smart, RBA, TC functions and even a super mode. Make adjustments via the 0.96" color OLED screen
The shape is ultra ergonomic with a leather coating for a great comfort of use. The design has changed a little compared to the first Drag 3, especially with an eagle print (depending on the model).
The Drag 3 TPP X kit from Voopoo, make way for big steam clouds!
Voopoo is back with its Drag 3 TPP X! The design is breathtaking, just like the first Drag 3, but even better! Its outstanding performance will allow you to make huge clouds full of flavor using the clearomizer TPP X.
The kit Drag 3 TPP X Voopoo, a great autonomy!
The Drag 3 electronic box does not work with 1 battery, but 2 batteries 18650 (not included) for a great autonomy. Perfect for vaping all day and / or for big vapers! The battery door is located under the mod. Know that the recharge is done quickly thanks to the USB-C cable delivered. However, we recommend you to charge your batteries via a dedicated external charger to preserve their life.
The performance of the e-cigarette Drag 3 TPP X Voopoo
The ecigarette Voopoo is equipped with a latest generation GENE.FAN 2.0 chip responsive (reaction time of 0.001 seconds) supporting the following functions that you set via the OLED color screen of 0.96":
- Smart mode: the box detects the installed coil to adapt the power (between 5 and 177W)
- RBA mode: perfect for installing a rebuildable atomizer (including the PNP RTA Voopoo)
- TC mode: after a Voopoo chipset update, you can use the temperature control (from 100°C to 315°C)
- Super mode: when the value of the coil is between 0.1 and 0.3 ohm and the power of the box is greater than or equal to 80W, this function is activated automatically to heat the coil faster
But also, you are assured to have all the necessary protections as in case of short circuit, overload, overheating, reverse polarity and excessive discharge.
The beautiful design of the Drag 3 TPP X Voopoo
The Drag 3 box may remind you of the Drag X/S and even the Drag 3? Indeed, this mod takes some of the design of its predecessors, while bringing some novelties like the beautiful eagle design (for some models). Its ergonomics and its leather covering offer a great comfort of use. Also made of zinc alloy, this little box will be solid!
The TPP X Voopoo tank, a DL draw with dense vapor
The clearo TPP X is composed of the cartridge TPP-X magnetized 5.5 ml which is made of PCTG and a 510 stainless steel adapter . This tank is compatible with the tPP coils from Voopoo for a DL draw with dense vapor. However, you can use the pNP coils Voopoo with the pNP cartridge for a RDL or MTL draw (sold separately).
2 coils are delivered for a DL air draft:
- TPP DM2 of 0.20 ohm (mesh): DL overhead - to be used between 40 to 60W - ratio 50PG/50VG to 20PG/80VG
- TPP DM3 of 0.15 ohm (mesh): DL overhead draw - to be used between 80 and 100W - ratio 50PG/50VG to 20PG/80VG
Also use the other TPP coils (sold separately) :
- TPP-DM1 of 0.15 ohm: very aerial vape with big cloud of vapor - To use between 60 and 80W - Ratio 50PG/50VG to 20PG/80VG
- TPP-DM4 of 0.3 ohm: aerial vape with less vapor - to use between 32 and 40W - Ratio 50PG/50VG to 20PG/80VG
Mesh technology promotes both flavor and vapor production. The TPP coils are designed in single mesh with double heating zone and thus rise quickly in temperature to give place to the cloud of dense vapor. For even more sensations, modulate the airflow adjustable to 360 ° for a more or less airy draw
An easy use for the clearo Voopoo TPP X
To fill the cartridge TPP-X, no need to remove the tank. It is done on the side. To do this, press the black button on the top cap and turn to the left. Then remove the silicone cap to fill. And finally, close the silicone cap and turn to the right.
However, to change the coil you will need to remove the cartridge. Then pull out the coil, prime a new one and put it in place. And finally replace the cartridge, fill and wait 10 minutes before vaping.
Be careful, it is necessary to change your coil about every 2 weeks depending on your use. Remember to replace your coil when you change flavor.
Here is what is delivered to you :
- 1 Drag 3 box
- 1 cartridge TPP X of 5.5 ml
- 1 adapter 510
- 1 TPP DM2 of 0.20 ohm
- 1 TPP DM3 of 0.15 ohm
- 1 USB-C cable
- 1 user manual
The characteristics of the ecig Drag 3 TPP X Voopoo :
- Dimensions: 140 mm x 50.25 mm X 25 mm
For any questions regarding your order or product availability please use our contact form
Orestis L. published the 31/08/2022 following an order made on 18/08/2022
Quite small and light, but good menus and firing.