Starter kit Zlide Tube 4ml D24 - Innokin

4ml 3000mAh Internal battery 16W MTL Multifunctional
Starter kit Zlide Tube 4ml D24 - Innokin
Starter kit Zlide Tube 4ml D24 - Innokin
Starter kit Zlide Tube 4ml D24 - Innokin
Starter kit Zlide Tube 4ml D24 - Innokin
Do you have a question?Do you have a question about this product?

The Zlide Tube kit of the brand Innokin is a real little nugget for a beginner vapoteur, and even an initiate in search of a powerful MTL vape.

Resistant and ultra simple to use, we have here a complete electronic cigarette kit designed to accompany you for many years without worry and without fuss.

Its classic tube format of 24mm in diameter has a battery of 3000mAh, ensuring a very long autonomy to last more than a day.

The clearomizer Zlide associated with the battery is a model of the kind: 4ml / filling ultra smart / child safety.

Big +: this kit uses the excellent Zenith / Zlide resistances that are very widespread and qualitative. And it automatically detects the resistance to adapt to the power: nothing to adjust!

4ml 3000mAh Internal battery 16W MTL Multifunctional

Zlide Tube kit from innokin: the new reference for beginner MTL vaping in a complete kit without adjustment!

Innokin hits hard with this kit Zlide Tube! A compact tube format full of autonomy (3000mAh!!), with the Zlide 24mm clearomizer which is a reference of MTL vape tight or the flavors is at the rendezvous


Who is the kit Zlide Tube?

Because of its specificities and its ease of use, it is an ideal partner for the transition to vape, and upmarket and sensation for vapers already initiated. A real MTL draw bluffing efficiency awaits you!

It is no less versatile thanks to its airflow ring (air draft) adjustable, allowing open to the max to have a semi-aerial draw very pleasant (with the Zenith 0.8ohm resistors, or other Zenith resistors not delivered with the kit lower in ohm to take separately).

Its filling is done by the top thanks to its sliding top-cap: childish! Moreover, its tank has a capacity of 4ml which is huge!

clearomiseur-zlide.png

The key words of the Zlide Tube: simplicity, efficiency and durability!

kit-zlide-tube-4ml-innokin-5.jpg


The battery of the Zlide Tube kit is Smart!

No adjustment necessary: the battery will automatically adapt in terms of power to the resistance that you place in the Zlide. With a Zenith resistor higher than 1ohm, it will set itself to 13W, and if lower, to 16W!

It will also indicate you the remaining autonomy thanks to the color code of the LED present at the level of the switch button:

- Green: 100 to 40% of remaining autonomy
- Orange: 40 to 10%
- Red: It will be necessary to think of recharging it with its micro-usb cable!

Its recharging is also fast thanks to its USB 1A connection

A wide range of resistances for different sensations of vape

The Zlide Tube kit comes with 2 models of Zenith & Zlide resistors:

- 1.2 ohm: offers a tasty vape with a real tight draw MTL (very economical in e-liquid) => to be used with e-liquids not exceeding 50% vegetable glycerin (VG)
- 0.8 ohm : offers a warmer vape and allows you to use slightly more viscous e-liquids (up to 60% VG)

But this kit is also compatible with other Zenith & Zlide resistors! Leave room for experimentation of sensations!

Zenith%20Coil-2.png

The installation of the resistance on this clearomizer SAVEUR MTL is easy and will not cause you any concern

The Zlide Tube Innokin kit comes with

- 1 3000mAh smart battery
- 1 Zlide clearomizer 24mm
- 1 Zenith resistor 0.8ohm
- 1 Zenith resistor 1.2ohm
- 1 additional tank
- 1 additional special flavor drip-tip
- 1 micro-USB cable 1A
- 1 manual
- 1 informative brochure on safety

Dimensions: 136,23 x 24mm

Innokin%20Zlide%20Tube%20Kit%20Banner-4.jpg

Capacity (ml)
4ml
Hardware format
Vape Pen
Battery life (mah)
3000mAh
Battery type
Internal battery
Maximum power
16W
Type of inhalation
MTL, Multifunctional
Diameter
24mm, Up to 14mm, 15mm, Up to 16.5mm, Up to 16mm, 17mm, 18,5mm, 18 mm, 19,5mm, Up to 19mm, Up to 20mm, Up to 22mm, 23,5mm, Up to 23mm
Airflow
Bottom Airflow, Adjustable
Fill type
Top Filling
Compatible coils
Z-coil
With settings
No
Charging possible via USB
Yes
Country of manufacture
made in China

For any questions regarding your order or product availability please use our contact form

* Mandatory field
Aline 2023-12-21 12:50:56
Quel résistance exactement il faut pour le ZLide Tube? J'ai des 0 3/30-40w et cela ne fonctionne pas
Merci d'avance.
A. Messerli
FREEVAP
Vous pouvez utiliser toutes les résistances Z coil sauf la 0.3 ohm et la 1.00 ohm. Cela est indiqué dans le détail de la fiche produit des résistances : https://www.freevap.ch/fr/resistances-tetes-d-atomiseurs/1825-resistances-zenith-innokin-pack-x5.html
Odette Marjorie 2023-10-03 15:51:30
Bonjour,
Est-ce que les joints transparents reçus avec la Zlide tube doivent être mis sur la e-cigarette ?
FREEVAP
Bonjour, non il s'agit de joints supplémentaires en cas de détérioration ou de casse des joints déjà présents sur l'appareil.
1/3
CHF44.50
In stock
Tax included

Free delivery from 29,90CHF purchase
If you don't smoke, don't vape

close

Wishlist