Cartridge BP80 - Aspire | 4,6ml

4,6ml Multifunctional DTL MTL Bottom Airflow Adjustable

The BP80 cartridge is designed for the BP80 pod kit fromAspire

For direct inhalation (air draw - DL) or indirect (tight draw - MTL), these cartridges can hold up to 4.6 ml of your favorite eliquids. It is a replacement tank in case of worn cartridge or when you want to vaper another eliquid without emptying and filling your cartridge

The filling is very simple and is done from the bottom, only by lifting the silicone cap

Use your cartridge BP80 Aspire with the BP80 pod kit, BP80 resistors of 0.17 ohm, 0.3 ohm, 0.6 ohm and 1.0 ohm and the base RBA Aspire.

4,6ml Multifunctional DTL MTL Bottom Airflow Adjustable Bottom Filling

Product Description

BP80 Replacement Cartridge for Aspire BP80 Pod

Do you own the Aspire BP80 pod kit? Then buy the replacement pod cartridge with a capacity of 4.6 ml. Why? Simply, you can fill each cartridge with a different eliquid and just change the cartridge. But also, in case the tank is worn out. Thanks to its versatility, use it for indirect inhalation (tight draw - MTL) or direct (air draw - DL).

How to fill the cartridge BP80 Aspire?

Filling the cartridge is very easy and is done from below. To do this, remove the replacement cartridge Aspire pod, turn it over and finally lift the silicone seal before filling with your favorite eliquid. Then, close the cap and replace the cartridge on the pod. Be careful, wait a few minutes before vaping so that the cotton has time to soak in liquid and therefore not prematurely damage the resistance

With what equipment to use the cartridge BP80 Aspire?

The cartridge is used with the pod kit BP80 aspire brand, but also the bP80 resistances 0.17 ohm, 0.3 ohm, 0.6 ohm and 1.0 ohm. The latter promote a good rendering of flavors while producing a large cloud of steam. For the vape experts, also place the Aspire BP80 RBA tray to create your own coil.

Technical characteristics